Ryan's Board/Case - March09

I've recently built a board and case for my friend Ryan from 'The Black and White'

Heres a few pics of it, a few during the build, and some final shots.
The case was 930mm x 470mm x 170mm, with carpet and foam in the base to keep the board in place. I mounted the wireless and pedal power 2+ under a tier, and custom wired up the whole board, using coreX2 leads.


So this was after cutting the board out, just getting the right layout of the pedals and double checking everything fit.


Board has been painted, tier mounted and some pedals attached


The finished board, most pedals were mounted with brackets, except for the holy grail and tremolo, which didn't have any holes on the underside, so i've used carpet/velcro and cable ties to hold them down.

The running order for this board is:
GUITAR
Wireless -> boss TU-2 -> Visual Sound Jeckyll+Hyde -> Proco Rat
-> Bypass Loop
Loop1 -> Blue Box -> Pulsar Tremolo
Loop2 -> boss DD -> Line6 DL4 -> Holy Grail
-> Line 6 MM4 -> Line6 DL4
AMP
All are being powered by a pedal power 2+, except for the holy grail and MM4, which are running off a separate supply.


Back of the case, lift off hinges


Ball corners are used to hold the extrusions together tightly in place


Top of the case, leather handle and surface mount butterfly latches


And finally, the board mounted into the case!

If anyone is interested in getting a board and/or case made, shoot me a message through myspace or email me at chris2as@gmail.com and we can go from there. I can make them for much cheaper than professional businesses quote, and at no sacrifice to the quality(i'm using the exact same materials) i'm just doing this for a bit of fun on the side of my jobs, so i'm not planning on charging a whole lot.

Chris